contact us
operating hoursMonday to Friday ：8:30-17:30
Saturday to Sunday ：9:00-17:00
Contact informationPhone：0317-8308862
Fax：0317-8308861
Phone：13932734032
Contact：Yao Yang
E-mail：[email protected]
online service
How to maintain color steel equipment
Source: Advance Press Machine Release date：2017-12-21 15:48 Click：
Times
How to maintain color steel equipment
First, the hydraulic circuit
Pressing machine should be checked after repairing the hydraulic system, 1. Check the oil level every week. Oil level below the window should be filled with hydraulic oil;
2. Must not exceed 70 ℃, 2. System oil temperature should be between 35 ℃ ~ 60 ℃. If it is too high will cause the deterioration of the oil and accessories.
3. The hydraulic oil used in this machine is ISOHM46 or MOBILDTE25
4. After each work 40006000 hours after the oil change, 4. The new machine should work 2000 hours after the oil change. For each oil change, the tank should be cleaned.
Second, hydraulic components
1. Do not use detergent; 1. Clean the hydraulic components (base plates, valves, motors, pumps, tubing, etc.) monthly to prevent dirt from entering the system.
2. Check the pressure of the pipe bending machine at any deformation, 2. After using a new machine. If any abnormalities should be replaced, after two months of use, the connection of all the accessories should be fastened, the work should be shut down, the system has no pressure.
Third, the filter
1. The filter should be replaced or thoroughly cleaned; 1. Every oil change.
2. Every 3 months for inspection and cleaning, 2. The air filter on the tank. Best 1 year replacement.
3. Should be replaced; 3. Machine related alarm or other unclean oil filters and other abnormalities.